Water Gardening, Installing a Pool for Water Plants

Add a new dimension to your garden with a water feature for plants. Water gardening is fun and easy once you get started and will provide a beautiful focal point in you garden. No matter how small a space, you can have a water garden. Small water gardens can be just as attractive as larger ones, it all starts with the planning. In this article we will look at the addition of a small, prefabricated pool.

Water Garden PoolThe first thing to consider is where to place your water garden. Choose carefully. Your water garden should complement your garden, if you already have a developed one, or you may choose to have it as a center attraction in a new garden scheme. It’s up to you. Also consider placing it so that it is visible from inside the home, this will have the added attraction of bringing the outdoors indoor. But remember that these prefab pools will look smaller, typically from around 36 to 72 inches in length, once it is installed and usually only have a depth of about 18 inches. (There are larger ones available but they are rare). This shallow depth will make it difficult to winter lilies and fish, if you choose to add them. If you live in an area where you experience freezing temperatures for extended periods, plants and fish may not survive. Also algae control can be difficult if your pool does not have moving water or enough shade, which is something to consider before you buy (we will discuss algae control in another blog).

Construction is very straightforward. Usually you can purchase your pool as a kit with complete instructions for their installation. It will entail digging a hole to place the basin in, slightly over sized, to accommodate it. You will want to be sure that your final depth has tamped, that is compactedPrefabricated Pool, soil. You can accomplish this by using a tamp. A tamp is a flat, cast iron base, usually 8 inches square, with a handle protruding from its center, and is available at your garden or tool center. This will limit the amount of soil compression, or sinking, that may accrue. Then sand is usually used to rest the bottom of the basin on and to fill all voids around it to add support. Remember that water is heavy and the plastic used in these prefab pools need to be supported so they will not distort. Be sure to keep the basin level during installation, that way it will be uniform and not have a low side that water can escape over. The method for back filling around the outside of the basin is to add about 4 inches of water to the pool and then back fill the outside with the sand. Continue alternating filling with water and back filling with sand until you have the basin fully installed.

Adding stones at the edge of the top lip of the pool will disguise the plastic and add a decorative accent, adding harmony to your project.

My next topic will be plants for your water garden, so check back for ideas and considerations on plants for your water garden.

For more ideas on ponds see Fantastic Fish Ponds.

Have fun with your home improvement projects.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: